不锈钢纤维网对热压铁基预合金胎体抗冲击韧性的影响          下载免费PDF全文

孙吉伟  吴海霞  沈立娜  杨甘生 《探矿工程》2020,47(2):73-77

针对孕镶金刚石钻头在孔底钻进时受到各种冲击力而导致胎体出现裂纹甚至断裂的问题，提出了应用不锈钢纤维网提高胎体抗冲击韧性的方法。通过控制纤维网的摆放位置、目数和层数3个变量，测试了不同组合变量下的胎体抗冲击韧性。通过试验得到：（1）不锈钢纤维网能有效提高胎体的抗冲击韧性，而且X轴位置效果更好；（2）当纤维网的目数相同时，胎体抗冲击韧性随纤维网层数的增加而减小；（3）在纤维网层数相同的情况下，随着纤维网目数的增加，胎体抗冲击韧性呈现先增大后减小的趋势。当添加30目单层纤维网时，胎体的抗冲击韧性达到最大值。通过观察冲击断口、分析胎体断裂机理，解释了出现这种规律的原因，并提出了进一步优化胎体抗冲击韧性的方法。  相似文献   

Main active faults and seismic activity along the Yangtze River Economic Belt: Based on remote sensing geological survey     

《China Geology》2020,3(2):314-338

The Yangtze River Economic Belt (YREB) spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and present-day crustal deformation. Active faults and seismic activity are important geological factors for the planning and development of the YREB. In this paper, the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings, using both remote-sensing data and geological survey results. The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed. The main active fault zones in the western YREB, together with the neighboring regional active faults, make up an arc fault block region comprising primarily of Sichuan-Yunnan and a “Sichuan-Yunnan arc rotational-shear active tectonic system” strong deformation region that features rotation, shear and extensional deformation. The active faults in the central-eastern YREB, with seven NE-NNE and seven NW-NWW active faults (the “7-longitudinal, 7-horizontal” pattern), macroscopically make up a “chessboard tectonic system” medium-weak deformation region in the geomechanical tectonic system. They are also the main geological constraints for the crustal stability of the YREB.  相似文献   

Simplified multi-block constitutive model predicting earthquake-induced landslide triggering and displacement along slip surfaces of saturated sand     

《Soil Dynamics and Earthquake Engineering》2014

Slopes consisting of saturated sand have recently moved down-slope tens or hundreds of meters under the action of earthquakes. This paper presents a simplified but accurate method predicting the triggering and displacement of such landslides. For this purpose, a simplified constitutive model simulating soil response of saturated sands along slip surfaces is proposed and validated. Then, this constitutive model is coupled with the multi-block sliding system model to predict the triggering and displacement of such slides. The multi-block model considers a general mass sliding on a trajectory which consists of n linear segments. The steps needed to apply this method are described in detail. The method was applied successfully to predict the triggering, the motion and the final configuration of the well-documented (a) Higashi Takezawa, (b) Donghekou and (c) Nikawa earthquake-induced slides.  相似文献   

一种基于Fréchet距离的断裂等高线内插算法     

郝志伟  李成名  殷勇  武鹏达  吴伟 《测绘通报》2019,(1):65-68,74

等高线内插是提高地形图精度的一个常用手段，在地图综合等领域中有很重要的作用。在实际地形图数据库中，等高线除了存在完整的计曲线以外，还有一部分断裂的首曲线。已有的等高线内插研究中未考虑对此类数据的处理，为此，本文提出了一种基于Fréchet距离的断裂等高线内插算法。首先提出了等高线度量关系的计算方法，然后对等高线的节点均匀加密，并利用Fréchet距离进行相似度判断以选择参考等高线，最后根据“最近点”的方式进行插值。通过对江苏某地区实际数据的试验，验证了该算法的合理性，对于鞍部地区的内插，有更好的适应性和准确性。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

长白山火山下方地幔转换带中滞留的俯冲太平洋板块存在空缺吗?   总被引：5，自引：3，他引：2  

雷建设  赵大鹏  徐义刚  樊祺诚  米琦  杜沫霏  鲁明文 《岩石学报》2018,34(1):13-22

针对近年来长白山火山下方地幔转换带中是否存在低波速异常指示的太平洋板块"空缺"而引起的不同科学认识的热烈辩论,本文主要回顾了我国东北地区地幔转换带的体波成像结果。使用相对走时残差的远震体波成像结果显示,长白山火山以西地幔转换带中存在低波速异常指示的太平洋板块"空缺";而使用绝对走时残差的区域成像和全球成像结果,尽管展示出长白山火山以西比以东略低的波速异常,但长白山火山以东至我国东北重力梯度带区域下方的地幔转换带均展示出明显的连续的高波速异常。在接收函数分析时,如果以全球平均值660km而非我国东北地区平均值670km作为基准,来分析660km间断面是抬升还是下沉;以全球平均值250km而非我国东北地区平均值260km作为基准,来分析地幔转换带是增厚还是减薄的话,则可以得到长白山火山以东至我国东北重力梯度带区域660km间断面下沉与地幔转换带增厚的认识。这种与绝对走时残差成像结果展示的地幔转换带为连续的高波速异常结果相一致的结果,说明太平洋板块俯冲前缘已由日本海沟抵达我国东北松辽盆地与大兴安岭交界处。结合高温高压实验、数值模拟与岩石地球化学研究结果,本文并不支持长白山火山以西的地幔转换带存在低波速异常指示的板块"空缺"和地幔转换带"减薄"的认识。长白山火山的深部起源与太平洋板块深俯冲至我国东北松辽盆地与大兴安岭交界处形成的"大地幔楔"结构动力学相关。  相似文献   

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China     

FAN Cunhui  HE Shun  ZHANG Yu  QIN Qirong  ZHONG Cheng 《《地质学报》英文版》2018,92(6):2351-2366

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.  相似文献   

页岩压裂影响因素三维模型数值分析     

张健  张国祥  王金意 《江苏地质》2018,42(1):127-130

不同影响因素对页岩水力压裂效果有不同的影响。基于三维数值计算模型介绍了水力压裂的典型过程,针对水平最小主应力、页岩的弹性模量和渗透系数对压裂的影响进行了分析。结果表明:随着水平最小主应力的增加,裂缝高度也随之增加;随着页岩的弹性模量增加,裂缝的高度随之降低;随着渗透系数的增加,裂缝高度也随之增加;随着压裂液的黏度系数提高,裂缝的高度降低。  相似文献